SPECIFICATION CONTROL DRAWING Product Revision Product Name Ident. Code SO63-1-01 E SO631R SO63-2-01 E SO632R SO63-3-01 E SO633R SO63-4-01 E SO634R SO63-5-01 E SO635R Component Dimensions L1.75 oB oC min min (L0.070) 16.50 1.90 2.65 (0.650) (0.075) (0.105) 16.50 2.65 3.68 (0.650) (0.105) (0.145) 16.50 4.30 5.08 (0.650) (0.170) (0.200) 19.10 5.95 6.45 (0.750) (0.235) (0.255) 19.10 7.00 7.60 (0.750) (0.275) (0.300) Shall Accommodate with Cable Dimensions oD oE oF max max min 1.90 2.65 0.90 (0.075) (0.105) (0.035) 2.65 3.68 1.40 (0.105) (0.145) (0.055) 4.30 5.08 2.15 (0.170) (0.200) (0.085) 5.95 6.45 3.30 (0.235) (0.255) (0.130) 7.00 7.60 4.30 (0.275) (0.300) (0.170) MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride. 2. SOLDER PREFORM WITH FLUX AND THERMAL INDICATOR: SOLDER: TYPE Sn63 per ANSI/J-STD-006. FLUX: TYPE ROL1 per ANSI/J-STD-004. THERMAL INDICATOR: Fusible ring, melt point: 221C. 3. MELTABLE RINGS: Stabilized thermoplastic. Color: blue. 4. PRE-INSTALLED BRAID: Nickel-plated copper strands. CMA 640. APPLICATION 1. These parts are designed to provide an environment protected shield termination on cables, rated for 125C minimum, meeting the dimensional criteria listed and having tin or silver-plated shields and insulation compatible with the insert material. For compatible insulations, see MIL-S-83519/2 or consult Tyco Electronics/Raychem. 2. When installed per Raychem process standard RCPS-100-70, assemblies will meet those requirements of Raychem Specification RT-1404 and MIL-S-83519/2 which do not require electrical testing while parts are immersed in water. 3. Temperature range: -55C to +150C. 4. Parts shall be marked with identification code per table. For best results, prepare the cable as shown: Tyco Electronics Corporation 300 Constitution Drive, Menlo Park, CA. 94025, U.S.A. TITLE: Raychem DOCUMENT NO.: Unless otherwise specified dimensions are in millimeters. [Inches dimensions are shown in brackets] TOLERANCES: 0.00 N/A 0.0 N/A 0 N/A DRAWN BY: SOLDERSLEEVE DEVICE SHIELD TERMINATION WITH BRAID SO63-XX-01 Tyco Electronics reserves the right to amend this drawing at any time. Users should evaluate the suitability of the product for their ROUGHNESS IN application. MICRON CAGE CODE: REPLACES: DCR NUMBER: ANGLES: N/A M. FORONDA 06090 D982100 D030398 If this document is printed it becomes uncontrolled. Check for the latest revision. DOC. ISSUE: DATE: 5 PROD. REV.: SEE TABLE 5-Aug-03 SCALE: None SIZE: A SHEET: 1 of 1